Laser Non-modulator Tub Sensor Receiving Module Laser output High Level

This Laser Non-modulator Tub Sensor Receiving Module Laser output High Level is a sensor for Raspberry Pi and Arduino to receive the laser output and decode it digital data. At Input, the module Receive laser signal when output high level; Does not receive laser signal when output low level. On detecting a laser signal, output goes at a high level (5V) until the laser signal is there.

To use this module take care that it must be used in a dark closed room as it is a non modulator Receiver so sunlight and others might affect it. Its use is simple just power the device by VCC and GND pins and connect the Signal Output Pin to any GPIO Pin on your controller.

Features :

• Output high level when received the laser signal
• Output low level when not receive laser signal.
• Application: Electronic Circuits

Specifications:

• Operating Voltage (VDC): 5
• Operating Temperature (°C): -30 to 90
• Length (mm): 25
• Width (mm): 15
• Height (mm): 8
• Weight (gm): 3

Package Includes

• 1 x Laser Non-modulator Tub Sensor Receiving Module

Note:

• The sensor uses a non-modulated laser receiver, recommended to use in dimmer light or indoor environments.