0.1-2000mhz RF Wideband Amplifier Gain 30db Low-Noise Amplifier LNA Board Module
0.1-2000mhz RF Wideband Amplifier Gain 30db Low-Noise Amplifier LNA Board Module can be applied to various RF receive front-end and increases the communication distance. It is widely used for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise RF signal amplification
Features:
- This RF Amplifier with wide frequency range, high gain, low noise figure.
- This Low-Noise Amplifier Module can be applied to various RF receive front-end and increases communication distance.
- When the working frequency is less than 500 MHZ, it gets well gain flatness, can make it less than 1dB after careful adjustment.
- The lower the frequency, the higher gain consistency.
- Used for short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise RF signal amplification.
Specifications:
- Input supply voltage Range: 6-12 VDC
- Operating frequency: 0.1-2000MHz
- Maximum power output: +10dBm at 10mW
- Amplifier gain: F=0.1MHz, gain=32dB
- Amplifier gain: F=500Mhz, gain=31dB
- Amplifier gain: F=1000MHz, gain=29dB
- Amplifier gain: F=1500Mhz, gain=25dB
- Amplifier gain: F=2000MHz, gain=20dB
- Diameter of end Connector (mm): 6.2
- System impedance: 50Ω
- End Connector gender: SMA-Female
- PCB Colour: Green + Gold
- Module Dimensions (LxWxH) (mm): 52 x 25 x 6
- Weight (gm): 5
Operating Tips:
- Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 0.1 uF, working to 0.1 MHz.
- Increase the input and output capacitance appropriately, can extend the cut-off frequency, such as 10uF capacitance can work to 5KHz.
- When the power supply voltage changes in 5V-8V, it can be used as a variable gain amplifier, gain increases with the increase of the power supply voltage, which suitable for radio frequency receive front-end circuit, using DA control power supply voltage, to control the gain of the amplifier, automatic gain control.
- When the power supply voltage in 8V-10V, the low-frequency end gain up to 30 dB, at this time the amplifier has a low noise coefficient and good stability.
- When the voltage is 12V, reach maximum gain, the low-frequency end gain of 32.5 dB.
Package Includes:
- 1 x 0.1-2000mhz RF Wideband Amplifier Gain 30db Low-Noise Amplifier LNA Board Module
No reviews yet. Be the first to review this product!
People Also Bought
Related products
HX1838 VS1838 NEC Infrared IR Remote Control Sensor Module
Digital Radio Frequency Power Meter -75~+16dBm Power Attenuation Can Be Set Ultra Small LCD
DC 5V 1 Channel Relay Module Infrared IR Remote Switch Control
DC 12V 1 Channel Relay Module Infrared IR Remote Switch Control
2.4GHz NRF24L01 Module with PA+LNA SMA Wireless Transceiver Antenna
3.3V Adapter Board for 24L01 Wireless Module
Ultra small wireless SI4432 Long Distance Wireless Transceiver Module
433Mhz RF Transmitter With Receiver Kit For Arduino ARM MCU Wireless
Trending Products
FD2103S Gate Driver IC Fortior Tech SOP-8
A2212 1000KV BLDC Brushless DC Motor for Drone
Mini MP1584EN DC-DC 3A Adjustable Step down Buck Converter Module
UBlox NEO-M8N GPS Module with Ceramic Active Antenna
XBee USB Adapter FT232RL for Arduino with Cable
Special Offers
Heat Shrink Sleeve 60mm Black 1meter Industrial Grade (HST)
SN390 Adjustable Printed Circuit Board Holder Frame PCB Soldering Assembly Stand Clamp
Multipurpose Precision Welding Soldering Machine Iron Stand with Magnifying Glass ( Helping Hands)
XH-M229 Desktop PC ATX Power Supply Transfer Module
Portronics Adapto 648 POR-648, 2.4A Quick Charging Dual USB Port with 1M Micro-USB Charging Cable (White)
Recently Viewed Products
SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port
1×40 Right Angle Female Berg Strip Connector – 2.54mm Pitch
2000W Thyristor SCR High-Power Electronic Regulator AC 220V, can Change Light, Speed and Temperature
24V/12V to 5V 5A Power Module DC-DC XY-3606 Power Converter